Huawei V5 Server RAID Controller Card User Guide
Before configuring RAID 5 on a Huawei V5 server, identify the installed RAID controller and select the matching driver and configuration instructions. Correct driver installation and configuration are important for stable operation and data protection.
English guide
V5 Server RAID Controller Card User Guide — official English edition, document EDOC1000163569
The xFusion edition verified for this article is issue 18, dated December 3, 2024. It explicitly covers FusionServer V5 servers, controller-specific configuration, management utilities and driver installation. This is an English alternative to the linked Chinese guide; its issue number is different from the original attachment's issue 26.
Choose the matching instructions
- Check the controller model and supported RAID levels in Technical Specifications. RAID 5 is not available on every controller.
- Open the chapter for that controller, then select the appropriate initial configuration and RAID-level procedure. Screens and paths depend on controller firmware and BIOS version.
- Follow Downloading and Installing the RAID Controller Card Driver. Use the recommended FusionServer iDriver release and its Driver Version Mapping to match the controller, operating system and driver package; follow the package's readme or the applicable OS installation guide.
Original reference
Original Chinese PDF attachment — issue 26 (access restricted). Its contents could not be compared page by page with the English edition. This page provides the verified English reference, rather than claiming the two editions are identical.