SA5214M5 CPU Installation: Translated Source Manual Excerpts

The original article is titled CPU replacement, but contains three cropped manual images rather than a full removal/replacement procedure. These English localization illustrations preserve that supplied content. Confirm the exact system/service manual and preparation requirements before physical work; no missing disassembly steps are invented.

1. Source power-supply excerpt

This adjacent manual crop includes five power-supply/reassembly notes. The cable-management handle and upper-cover screw notes are explicitly limited to the Tencent SA5214M5 configuration. Its reference to removal step 12 points to material not included in this article.

2. CPU and heatsink installation excerpt

The source specifies LGA3647 P, non-Fabric, tools A/B/C, socket-pin inspection, Pin 1 / triangle / white-mark alignment, clip engagement and removal of any protective film. It ends with a T-30 tool, 1.36 N·m (12 in-lbf) torque and screw order 1, 2, 3, 4. Those are source-specific installation values, not a general torque specification for every CPU socket or heatsink.

3. Original tool-photo crop, with English continuation

The tools are A: CPU vacuum pickup tool; B: CPU installation fixture; C: electric screwdriver. The lower photos numbered 1, 2 and 3 remain partially cropped, exactly as supplied in the source. These are English explanatory reconstructions of the source images; they do not show a newly performed installation. An exact public same-model official English manual was not retrieved during source checking.