XCC Service Data Parsing Instructions
Collecting ThinkSystem XCC Service Data files using the CLI, Drag-N-Drop, and in a Linux environment
These tools are for SERVICER USE ONLY!!
Complete the following steps to collect ThinkSystem XCC Service Data files using the CLI or Drag-N-Drop method.
Unlike IMM2 service data, XCC service data (*.TZZ) cannot directly be extracted using a general unzip tool such as 7z.
The attached tool .zip files - click here to use the CLI method and click for the Drag-N-Drop (DND) method. Each will allow a user to extract a XCC service data (*.TZZ) file locally.
To use these tools you must download and unzip the tool file to your laptop.
- Refer to the The 'readme.txt' file and the following screen-shots if you are using the CLI version.
- Refer to the 'DND..readme.txt' file for the Drag-N-Drop method.
CLI method
You can also check the installed FoD key information (From CLI tool v1.2)
Drag-N-Drop method
Linux environment
Complete the following command to extract XCC service data in a Linux environment (e.g. cygwin for Windows users - most of us).
Run the following 'simple' xcc_extract.sh script from bash
$> ./xcc_extract.sh 7X21_S4AAK069_xcc_180116-091420.tzz
Decompressing/Extracting ... 7X21_S4AAK069_xcc_180116-091420.tzz
DONE.
Extracted to /cygdrive/d/_support/_eTools/XCC/7X21_S4AAK069_xcc_180116-091420
$>
Or install lzop then enter below command.
$>sudo apt install lzop (ubuntu etc)
$>tar --lzop -xf sample.tzz