xFusion FusionServer iBMC One-Click Information Collection (Contents and diaginfo Command)

Servers

5.10 One-Click Information Collection

NOTE
iBMC V3.02.00.03 and later versions do not support the MD5 integrity check code.

Table 5-105 One-click information collection

File Name	File Content
dump\dump_info
dump_app_log	List of information collected by the iBMC.
dump_log	List of one-click information collecting result.
sn_history_info sn_history_info.1.gz	Modification record of product serial number in the FRU information. NOTE iBMC V3.07.01.75 and later versions can collect this information.
dump\dump_info\3rdDump
access_log	Apache access log.
access_log.1	Backup file of the Apache access log.
error_log	Apache error log.
error_log.1	Backup file of the Apache error log.
nginx.conf	Basic configuration file of Nginx.
nginx_http_server.conf	Configuration file of the Nginx HTTP server.
nginx_https_server.conf	Configuration file of the Nginx HTTPS server.
nginx_https_server_ext.conf	Extended configuration file of Nginx.
nginx_https_defualt_server_ext.conf	Extended configuration file of Nginx HTTPS defualt server.
nginx_ssl_ciphersuite.conf	Configuration file of Nginx HTTPS encryption suites.
nginx_ssl_protocol.conf	Configuration file of Nginx HTTPS versions.
nginx_ssl_verify_client.conf	Configuration file of Nginx two-factor authentication.
dump\dump_info\AppDump
agentless
agentless_dfl.log	Information about the Agentless module.
BIOS
BIOS_dfl.log	Information about the BIOS.
bios_info	BIOS configuration information.
currentvalue.json	Information about current BIOS configuration.
registry.json	BIOS registration file, containing BIOS configuration information.
result.json	Result of the BIOS settings configured using Redfish.
setting.json	Information about the BIOS settings configured using Redfish that have not taken effect.
BMC
BMC_dfl.log	Information about the iBMC module.
lldp_info.txt	LLDP configuration and packet statistics.
invalidsnlist.json	List of Failed Component Qualification.
mcinfo.txt	iBMC auxiliary firmware information.
nandflash_info.txt	NAND flash information.
net_info.txt	Information about network interface configuration.
ntp_info.txt	Error information about NTP synchronization failure.
psu_info.txt	Information about the PSUs of the server.
time_zone.txt	iBMC time zone information.
card_manage
aim_bmc_sensor_log	Original response data for a Redfish request from the module BMC sensor. NOTE iBMC V3.07.05.01 and later versions support this log.
aimodule_log.tar.gz	Log information of the AI module.
card_info	Information about the cards configured on the server.
card_manage_dfl.log	Information about the Card_Manage module.
gpu.log	GPU card memory ECC information. NOTE iBMC V3.08.07.03 and later versions support this log.
Pciecardn_register	Register information of the PCIe card. NOTE ● Servers configured with Gaudi 2E cards support collection of this log information. ● n indicates the slot number of the PCIe card.
profile.tar.gz	Information about the cards supported by the server. NOTE iBMC V3.08.07.05 and later versions support this log.
sdi_card_cpld_info	Information about the CPLD register of the SDI V3 card. NOTE This information can be collected only when the SDI V3 card is supported and correctly installed.
sl200_card_reg_info	Information about the register of the SL200 accelerator card. NOTE This information can be collected only when the SL200 accelerator card is supported and correctly installed.
cooling_app
cooling_app_dfl.log	Information about the Cooling module.
cooling_cfg.log cooling_cfg.log.1.gz	Configuration files for fan speed regulation.
cooling_running_log.csv cooling_running_log.csv.1.gz	Process files for fan speed regulation.
fan_info.txt	Information about the fan models and rotation speed.
CpuMem
cpu_info	Detailed information about the CPUs configured for the server.
CpuMem_dfl.log	Information about the CpuMem module.
mem_info	Detailed information about the DIMMs configured for the server.
ddns
ddns_dfl.log	Information about the DDNS module.
dfm
dfm.log	Information about the objects managed by the DFM.
dfm_debug_log dfm_debug_log.1 ……	PME frame debugging log.
Dft
Dft_dfl.log	Information about the DFT module.
diagnose
diagnose_dfl.log	Information about the Diagnose module.
diagnose_info	Port 80 fault diagnosis information and memory usage of the IFMM module.
discovery
discovery_dfl.log	Information about the Discovery module.
FileManage
FileManage_dfl.log	Information about the FileManage module.
FruData
FruData_dfl.log	Information about the FruData module.
fruinfo.txt	FRU electronic label information.
Part name_info.txt	EEPROM information of parts that support electronic labels. The file size is fixed at 16 KB.
ipmi_app
ipmbeth_info.txt	Information about the status of the IPMI channels of the management system.
ipmi_app_dfl.log	Information about the IPMI module.
kvm_vmm
kvm_vmm_dfl.log	Information about the KVM_VMM module.
Lcd
Lcd_dfl.log	Information about the LCD module.
LicenseMgnt
alm_protected.persist	Persistency file of the license management component ALM.
first_protected.persist	Persistency file of the license management component ALM.
LicenseMgnt_dfl.log	Managed object information.
lm_info	Information including the license status and device ESN.
second_protected.persist	Persistency file of the license management component ALM.
MaintDebug
MaintDebug_dfl.log	Information about the MaintDebug module.
MCTP
MCTP_dfl.log	Information about the MCTP module.
mctp_info	Information about MCTP.
net_nat
net_nat_dfl.log	Information about the Net_NAT module.
NetConfig
dhclient.log dhclient.log.1.gz	DHCP logs. NOTE iBMC V3.07.01.89 and later versions can collect this information.
lldp_info.txt	LLDP configuration and packet statistics.
net_info.txt	Information about network interface configuration.
NetConfig_dfl.log	Information about the NetConfig module.
Payload
Payload_dfl.log	Information about the Payload module.
PcieSwitch
PcieSwitch_dfl.log	Information about the PCIeSwitch module.
pcieswitch_info	Log information of the PCIeSwitch module.
pcieswitch_keyreg_data	PCIeSwitch key register information.
RetimerRegInfo	Retimer chip registry information.
portal
portal_dfl.log	Information about the portal module.
PowerMgnt
power_statistics.csv	Power statistic information.
power_bbu_info.log	BBU logs (only for the server that supports BBUs).
PowerMgnt_dfl.log	Information about the PowerMgnt module.
redfish
component_uri.json	Component URI list.
event_sender_info.log	Error notice shown when the Redfish subscription message is sent.
redfish_dfl.log	Information about the Redfish module.
rimm
rimm_dfl.log	Information about the StorageMgnt module.
sensor_alarm
current_event.txt	Current health status and alarms of the server.
LedInfo	Current indicator status of the server.
sel.db	Database information of the current SELs.
sel.tar	Compressed package of current and historical system event logs (SELs).
sensor_alarm_dfl.log	Information about the Sensor_Alarm module.
sensor_alarm_sel.bin	Original information and check value of the current SELs.
sensor_alarm_sel.bin.bak	Original backup information and check value of the current SELs.
sensor_alarm_sel.bin.bak.sha256	Integrity check code for the backup of original SELs.
sensor_alarm_sel.bin.sha256	Integrity check code for original SELs.
sensor_alarm_sel.bin.tar.gz	Compressed package of historical SELs.
sensor_info.txt	List of all sensors of the server.
Smm_Mgnt
Smm_Mgnt_dfl.log	Information about the Smm_Mgnt modules.
Snmp
Snmp_dfl.log	Information about the Snmp module.
SPDM
spdm_dfl.log	Information on the SPDM module management object.
*_import	User-imported SPDM baseline metrics.
afm_ca_hash.json	SHA256 value of the stored file.
StorageMgnt
PhysicalDrivesInfo	Hard drive history information folder. The sub-folders are named after the hard drives, for example, Disk0\disk_info. NOTE iBMC V3.07.00.77 and later versions can collect this information.
RAID_Controller_Info.txt	Information about the RAID controller card, logical drives, and hard drives.
StorageMgnt_dfl.log	Information about the StorageMgnt module.
switch_card
phy_register_info	Information about the PHY registry of the rear boards.
port_adapter_info	Information about the interface device of the rear boards.
switch_card_dfl.log	Information about the Switch_Card module.
UPGRADE
UPGRADE_dfl.log	Information about the Upgrade module.
upgrade_info	Version information about the devices related to the iBMC.
User
User_dfl.log	Information about the User module.
usb_mgmt
usb_mgmt_dfl.log	Information about the USB module.
dump\dump_info\BMALogDump
bma_debug_log bma_debug_log.1.gz bma_debug_log.2.gz bma_debug_log.3.gz	iBMA logs.
dump\dump_info\CoreDump
core-* (files starting with "core-".)	Memory dump file. It is the core dump file of an application program. One or more files are generated, depending on the system running status.
dump\dump_info\DeviceDump
i2c_info
*_info	I2C device memory or storage area information.
dump\dump_info\LogDump
crashdump
crashdump*.tar.gz	FDM TOR logs. NOTE Servers configured with Intel processors support collection of this log information.
ras_error_*.cper	Crashdump information when a system error or a system fault occurs. NOTE ● A maximum of 10 latest .cper files can be collected. ● Servers configured with AMD processors support collection of this log information.
EyeTest
Eye-Board Name-Switchn.json	PCIe Switch eye diagram test result data. NOTE ● iBMC V3.09.03.01 and later versions can collect this information. ● n indicates the Switch number on the board.
M3LogDump
m3_log m3_log.1 ……	M3 logs.
netcard
netcard_info.txt netcard_info_bk.txt	NIC configuration information.
pciecard
SDI log folder (SDI V3 and earlier versions), named in the SDI card slot number_SDI card name format, for example, pciecard5_IT21SHSG.	●fw_bios_log.bin: BIOS logs of the SDI card. ●fw_imu_log.bin: Intelligent management unit (IMU) logs of the SDI card. ●fw_last_log.bin: Lastword logs of the SDI card. ●fw_M7_log.bin: M7 logs of the SDI card.
The log folder of SDI card (SDI V5.1 version) is named as PCIeCard1(SDIV5.1)_SDI5.1.	●error_log_SDIV5.1.bin: Log files of SDI card OS. ●error_log_SDIV5.1.bin.1.gz: Log files of SDI card OS in compressed package.
sdi_blackbox	SDI black box log folder. NOTE The log information can be collected only after the SDI black box data files have been downloaded from the Diagnostics screen.
PCIe card log folder, named in the PCIe card name and slot number_PCIe card model format, for example, "PCIeCard6_SP570".	All PCIe card logs, including CPLD register information, error logs, last words, and preventive maintenance inspection logs. Example: ● cpld.log ● last_word_20160211182849 ● error_log_20160211182532 ● running_log_20160211183202
Retimer
Retimer log folder, which is named after the retimer object. For example, Cdr5902H_Obj_1-10.	Retimer log information, including: ●PCIe: PCIe command output information ●RAMLog: logs exported from the SRAM ●SerDes: SerDes information
runtimeerror
dram_runtime_*.cper	Memory error information during system runtime.
mca_runtime_*.cper	MCA error information during system runtime.
storage
_com_log _com_log.1.gz ……	RAID card serial port log, for example, RAID_Card1_com_log.
ctrllog	A folder containing all RAID controller cards logs. The sub-folders are named after the RAID controller cards. ●Raw log content of the RAID controller card's AP firmware: "ap.bin". ●Raw log content of the RAID controller card's IMU firmware: "imu.bin". ●Log parsing dictionary of the RAID controller card's AP firmware: "ap_index.gz". ●Log parsing dictionary of the RAID controller card's IMU firmware: "imu_index.gz". ●Raw data of power-off notice of the RAID controller card AP firmware: "lastword.bin". ●Raw data of statistics on the RAID controller card AP firmware: "dump.bin". ●Raw flash data of statistics on the RAID controller card AP firmware: "flash_dump.bin". ●Raw Nand flash log data of the RAID controller card: "0nandlog.bin" and "1nandlog.bin".
drivelog	A folder containing all SAS and SATA hard drive logs. The sub-folders are named after the hard drives, for example, Disk0. ●SATA hard drive logs, for example, SATA_Log, SMARTAttribute, SeagateFARMLog ●SAS hard drive logs, for example, SAS_Log and SAS_Log.1
phy	A folder containing PHY error code logs of all RAID controller cards and the expanders on the RAID controller card. The sub- folders are named after the RAID controller cards, for example, RAID_Card1. ●RAID controller card PHY error code log, for example, RAID_Card1_PHY_Error_Count.csv ●Expander PHY error code log, for example, RAID_Card1_Expander1_PHY_Error_ Count.csv
storage\storelib
storelib_debug_log storelib_debug_log.1 ……	Storelib library logs.
storelib8debug.txt storelib8debug.txt.1 ……	Storelib8 library logs.
storelibit_debug_log storelibit_debug_log.1 ……	Storelibit library logs.
storelibir3_debug_log storelibir3_debug_log.1 ……	Storelibir3 library logs.
dump\dump_info\LogDump
agentless_driver_log agentless_driver_log.1.gz agentless_driver_log.2.gz agentless_driver_log.3.gz ……	Agentless driver debug logs.
app_debug_log_all app_debug_log_all.1.gz app_debug_log_all.2.gz app_debug_log_all.3.gz	App Debug logs.
bmc_cpu_usage_info.log bmc_cpu_usage_info.log.1.gz	CPU usage information of the BMC (recorded when the CPU usage exceeds 70%). NOTE iBMC V3.07.01.51 and later versions can collect this information.
bmccom.dat	BMC serial port log.
bmccom_YYYYMMDD-HHmm.dat	BMC serial port log. NOTE ● iBMC V3.07.02.61 and later versions can collect this information. ● During the upgrade of mainboard CPLD or VRD, the information is collected automatically after power off (the VRD must supports that the AC takes effect after power off).
systemcom_YYYYMMDD- HHmm.dat	SOL serial port information. NOTE ● iBMC V3.07.02.61 and later versions can collect this information. ● During the upgrade of mainboard CPLD or VRD, the information is collected automatically after power off (the VRD must supports that the AC takes effect after power off).
BMCResetRecord.log	BMC restart record.
compliance_prompt_log	Compliance prompt log.
config_operate_log config_operate_log.tar.gz	User configuration operation log. NOTE V5/V6 servers support the collection of this log information in iBMC V3.07.03.63 and later versions. V7/V8 servers support this collection by default.
corefile	Core dump files.
CpuTempLogRecords_CPUn_COR ETEMP.csv CpuTempLogRecords_CPUn_COR ETEMP.csv.1.gz CpuTempLogRecords_CPUn_COR ETEMP.csv.2.gz CpuTempLogRecords_CPUn_COR ETEMP.csv.3.gz	Core temperature of CPUn. The file data format is: timestamp, scan interval (in milliseconds), data1, data2, data3…… NOTE n indicates the CPU number.
CpuTempLogRecords_CPUn_MAX MEMTEMP.csv CpuTempLogRecords_CPUn_MAX MEMTEMP.csv.1.gz CpuTempLogRecords_CPUn_MAX MEMTEMP.csv.2.gz CpuTempLogRecords_CPUn_MAX MEMTEMP.csv.3.gz	Maximum temperature of the memory channels of CPUn. The file data format is: timestamp, scan interval (in milliseconds), data1, data2, data3…… NOTE n indicates the CPU number.
cpun_m7_log cpun_m7_log.tar.gz	M7 coprocessor run log of CPU (only for the server that supports M7 coprocessor).
dfx_log dfx_log.tar.gz	DFX register information.
fdm.bin fdm.bin.tar.gz	Log of FDM original faults.
fdm_log fdm_log.tar.gz	FDM logs.
fdm_me_log fdm_me_log.tar.gz	Log of ME faults.
fdm_mmio_log fdm_mmio_log.tar.gz	FDM board configuration logs.
fdm_output fdm_output.1.gz fdm_output.2.gz fdm_output.3.gz	FDM logs.
fdm_pfae_log	Log of FDM perwarnings.
imu_log imu_log.tar.gz	IMU run log (only for the server that supports IMU).
ipmi_debug_log ipmi_debug_log.tar.gz	IPMI module logs.
ipmi_mass_operate_log ipmi_mass_operate_log.tar.gz	IPMI module operation logs.
kvm_vmm_debug_log kvm_vmm_debug_log.tar.gz	KVM module logs.
LSI_RAID_Controller_Log LSI_RAID_Controller_Log.1.gz LSI_RAID_Controller_Log.2.gz	Logs of the LSI RAID controller.
PD_SMART_INFO_C*	SMART log of hard disks. * indicates the serial number of the RAID controller.
linux_kernel_log linux_kernel_log.1 ……	Linux kernel logs.
log_records_info-2.csv	Records the number of times the voltage is lower than the alarm threshold.
maintenance_log maintenance_log.tar.gz	Maintenance logs.
mass_operate_log mass_operate_log.tar.gz operate_log operate_log.tar.gz	User operation log.
pcieswcom.dat	PCIe switch logs. NOTE ● G8600 V7 iBMC V3.07.02.25 and later versions support collection of this log information. ● GN560E V7 iBMC V3.08.03.01 and later versions support collection of this log information.
PD_SMART_INFO_C0	SMART information for SATA drives or sense information for SAS drives.
preserve.log	Logs of firmware upgrade without configuration retention.
ps_black_box.log ps_black_box.log.1.gz ps_black_box.log.2.gz ps_black_box.log.3.gz	Power supply black box logs.
remote_log remote_log.1.gz	Operation logs and SEL logs for Syslog test.
security_log security_log.1	Security logs.
strategy_log strategy_log.tar.gz	System running logs.
telemetry_logservice_offset	Telemetry logservice offset information.
telemetryLog	TelemetryLog information.
third_party_file_bak.log	Logs of third-party file backup.
uart3com.dat	Voice recording file of uart3.
uart3com_YYYYMMDD-HHmm.dat	Voice recording file of uart3. NOTE ● iBMC V3.07.02.61 and later versions can collect this information. ● During the upgrade of mainboard CPLD or VRD, the information is collected automatically after power off (the VRD must supports that the AC takes effect after power off).
uart4com.dat	Voice recording file of uart4.
uart4com_YYYYMMDD-HHmm.dat	Voice recording file of uart4. NOTE ● iBMC V3.07.02.61 and later versions can collect this information. ● During the upgrade of mainboard CPLD or VRD, the information is collected automatically after power off (the VRD must supports that the AC takes effect after power off).
dump\dump_info\OptPme
pram NOTE This folder contains files from the /opt/pme/pram directory. The files that are not included in this folder are intermediate files generated during the running of the program and have no information security issues.
filelist	List of files in the /opt/pme/pram directory.
lost+found	Folder.
proc_queue	Process queue ID folder.
semid	Process semaphore ID folder.
up_cfg	Upgrade configuration folder.
BIOS_FileName	SMBIOS information.
BIOS_OptionFileName	BIOS configuration information.
BMC_dhclient.conf	DHCP configuration file.
BMC_dhclient.conf.sha256	Integrity check code.
BMC_dhclient_ip.conf	DHCP configuration file.
BMC_dhclient_ip.conf.sha256	Integrity check code.
BMC_dhclient6.conf	DHCP configuration file.
BMC_dhclient6.conf.sha256	Integrity check code.
BMC_dhclient6_ip.conf.sha256	Integrity check code.
BMC_HOSTNAME	Host name.
BMC_HOSTNAME.sha256	Integrity check code.
cpu_utilise_webview.dat	CPU usage curve data.
CpuMem_cpu_utilise	Server CPU usage.
CpuMem_mem_utilise	Server memory usage.
CpuMem_mem_os_utilise	Server memory usage.
env_web_view.dat	Ambient temperature curve data.
eo.db	SEL database.
fan_speed_webview.dat	Fan speed log.
fdm_history.db	FDM health analysis engine database.
fdm_history.db.sha256	Integrity check code.
fdm_history.db.sha256_backup	Integrity check code.
fdm_history.db_backup	FDM health analysis engine database.
filelist	List of files in the /opt/pme/pram directory.
fsync_reg.ini	File synchronization configuration file.
lost+found	Folder.
io_utilise_webview.dat	IO usage curve data.
md_so_maintenance_log md_so_maintenance_log.tar.gz	Maintenance logs.
md_so_operate_log md_so_operate_log.tar.gz md_so_mass_operate_log md_so_mass_operate_log.tar.gz	User operation log.
md_so_operate_log.sha256	Integrity check code.
md_so_strategy_log md_so_strategy_log.tar.gz	Policy log.
md_so_strategy_log.sha256	Integrity check code.
memory_os_webview.dat	Memory usage curve data.
NetConfig_dhclient.conf	DHCP configuration file.
NetConfig_dhclient_ip.conf	DHCP configuration file.
per_config.ini	iBMC configuration persistence file.
per_config.ini.sha256	Integrity check code.
per_config_permanent.ini	iBMC configuration persistence file.
per_config_permanent.ini.sha256	Integrity check code.
per_config_reset.ini	iBMC configuration persistence file.
per_config_reset.ini.bak	iBMC configuration persistence file.
per_config_reset.ini.bak.sha256	Integrity check code.
per_config_reset.ini.sha256	Integrity check code.
per_def_config.ini	iBMC configuration persistence file.
per_def_config.ini.sha256	Integrity check code.
per_def_config_permanent.ini	iBMC configuration persistence file.
per_def_config_permanent.ini.sha2 56	Integrity check code.
per_def_config_reset.ini	iBMC configuration persistence file.
per_def_config_reset.ini.bak	iBMC configuration persistence file.
per_def_config_reset.ini.bak.sha256	Integrity check code.
per_def_config_reset.ini.sha256	Integrity check code.
per_power_off.ini	iBMC configuration persistence file.
per_power_off.ini.sha256	Integrity check code.
per_reset.ini	iBMC configuration persistence file.
per_reset.ini.bak	iBMC configuration persistence file.
per_reset.ini.bak.sha256	Integrity check code.
per_reset.ini.sha256	Integrity check code.
pflash_lock	Flash file lock.
PowerMgnt_record	Managed object operating information.
powerview.txt	Power statistic file.
proc_queue	Process queue ID folder.
ps_web_view.dat	Managed object operating information.
sel.db	SEL database.
sel_db_sync	SEL database synchronization lock.
semid	Process semaphore ID folder.
sensor_alarm_sel.bin	Original SEL file.
sensor_alarm_sel.bin.sha256	Integrity check code.
sensor_alarm_sel.bin.tar.gz	Compressed package of historical SELs.
Snmp_http_configure	HTTP configuration folder.
Snmp_http_configure.sha256	Integrity check code.
Snmp_https_configure	HTTPS configuration folder.
Snmp_https_configure.sha256	Integrity check code.
Snmp_https_tsl	HTTPS TLS configuration folder.
Snmp_https_tsl.sha256	Integrity check code.
Snmp_snmpd.conf	Snmp configuration backup file
Snmp_snmpd.conf.sha256	Integrity check code.
up_cfg	Upgrade configuration folder.
User_login	Login PAM login rules.
User_login.sha256	Integrity check code.
User_sshd	SSH PAM login rules.
User_sshd.sha256	Integrity check code.
User_sshd_config	SSH configuration file.
User_sshd_config.sha256	Integrity check code.
User_vsftp	FTP PAM login rules.
User_vsftp.sha256	Integrity check code.
save NOTE This folder contains files from the /opt/pme/save directory. The .sha256 file contains the integrity check code. The .bak file is the backup file. The .tar.gz file is a compressed file package. The per_.ini file is a configuration persistence file. The sel. is a system event log file. (The files that are not included in this folder are intermediate files generated during the running of the program and have no information security issues.)
filelist	List of files in the /opt/pme/pram directory.
BIOS_FileName	SMBIOS information.
BMC_dhclient.conf.bak	DHCP configuration backup file.
BMC_dhclient.conf.bak.sha256	Integrity check code.
BMC_dhclient.conf.sha256	Integrity check code.
BMC_dhclient_ip.conf.bak	DHCP configuration backup file.
BMC_dhclient_ip.conf.bak.sha256	Integrity check code.
BMC_dhclient_ip.conf.sha256	Integrity check code.
BMC_dhclient6.conf.bak	DHCP configuration backup file.
BMC_dhclient6.conf.bak.sha256	Integrity check code.
BMC_dhclient6.conf.sha256	Integrity check code.
BMC_dhclient6_ip.conf.bak	DHCP configuration backup file.
BMC_dhclient6_ip.conf.bak.sha256	Integrity check code.
BMC_dhclient6_ip.conf.sha256	Integrity check code.
BMC_HOSTNAME.bak	Host name configuration backup file.
BMC_HOSTNAME.bak.sha256	Integrity check code.
BMC_HOSTNAME.sha256	Integrity check code.
CpuMem_cpu_utilise	Managed object operating information.
CpuMem_mem_utilise	Managed object operating information.
eo.db	SEL database.
eo.db.sha256	Integrity check code.
eo.db.sha256_backup	Integrity check code.
eo.db_backup	SEL database.
fdm_history.db	FDM health analysis engine database.
fdm_history.db.sha256	Integrity check code.
fdm_history.db.sha256_backup	Integrity check code.
fdm_history.db_backup	FDM health analysis engine database.
filelist	List of files in the /opt/pme/pram directory.
md_so_config_operate_log.bak	User configuration operation log.
md_so_config_operate_log.bak.sha 256	Integrity check code.
md_so_config_operate_log.sha256	Integrity check code.
md_so_operate_log.bak	User operation log
md_so_operate_log.bak.sha256	Integrity check code.
md_so_operate_log.sha256	Integrity check code.
md_so_strategy_log.bak	Policy log.
md_so_strategy_log.bak.sha256	Integrity check code.
md_so_strategy_log.sha256	Integrity check code.
NetConfig_dhclient.conf.bak	DHCP configuration backup file.
NetConfig_dhclient_ip.conf.bak	DHCP configuration backup file.
per_config.ini	iBMC configuration persistence file.
per_config.ini.bak	iBMC configuration persistence file.
per_config.ini.bak.sha256	Integrity check code.
per_config.ini.sha256	Integrity check code.
per_def_config.ini	iBMC configuration persistence file.
per_def_config.ini.bak	iBMC configuration persistence file.
per_def_config.ini.bak.sha256	Integrity check code.
per_def_config.ini.sha256	Integrity check code.
per_power_off.ini	iBMC configuration persistence file.
per_power_off.ini.bak	iBMC configuration persistence file.
per_power_off.ini.bak.sha256	Integrity check code.
per_power_off.ini.sha256	Integrity check code.
PowerMgnt_record	Managed object operating information.
sensor_alarm_sel.bin	Original information and check value of the current SELs.
sensor_alarm_sel.bin.bak	Original information and check value of the current SELs.
sensor_alarm_sel.bin.bak.sha256	Integrity check code.
sensor_alarm_sel.bin.sha256	Integrity check code.
sensor_alarm_sel.bin.tar.gz	Compressed package of historical SELs.
Snmp_http_configure.bak	HTTP configuration backup file.
Snmp_http_configure.bak.sha256	Integrity check code.
Snmp_http_configure.sha256	Integrity check code.
Snmp_https_configure.bak	HTTPS configuration backup file.
Snmp_https_configure.bak.sha256	Integrity check code.
Snmp_https_configure.sha256	Integrity check code.
Snmp_https_tsl.bak	HTTPS TLS configuration backup file.
Snmp_https_tsl.bak.sha256	Integrity check code.
Snmp_https_tsl.sha256	Integrity check code.
Snmp_snmpd.conf.bak	Snmp configuration backup file.
Snmp_snmpd.conf.bak.sha256	Integrity check code.
Snmp_snmpd.conf.sha256	Integrity check code.
User_login.bak	Login PAM login rules
User_login.bak.sha256	Integrity check code.
User_login.sha256	Integrity check code.
User_sshd.bak	SSH PAM login rules
User_sshd.bak.sha256	Integrity check code.
User_sshd.sha256	Integrity check code.
User_sshd_config.bak	SSH configuration file.
User_sshd_config.bak.sha256	Integrity check code.
User_sshd_config.sha256	Integrity check code.
User_vsftp.bak	FTP PAM login rules
User_vsftp.bak.sha256	Integrity check code.
User_vsftp.sha256	Integrity check code.
dump\dump_info\OSDump
*.rep	Video files automatically recorded. NOTE If a video file exceeds 21 MB, you are advised to download and save it to the local PC. The iBMC will delete the video file larger than 21 MB during one-click information collection.
bsod_auto.jpeg	OS screenshot.
img*.jpeg	Image of the last screenshot of the server OS.
systemcom.tar	SOL serial port information.
video_caterror_rep_is_deleted.info	Information prompting users to delete oversized caterror video files.
dump\dump_info\Register
cpld_reg_info	Complex programmable logical device (CPLD) register information.
xxx_xxx_cpld_reg_info	Information about CPLD registers. The file naming format is device type_device name_cpld_reg_info. For example, Disk_BP3BC15HBBA_cpld_reg_info. (Including midplane and module.)
lsw_reg_info	Information about LSW registers.
phy_reg_info	Information about PHY registers.
cpu_reg_info	CPU register information.
oem_sensor_info	Secondary sensor information file.
vrm_reg_info	Information about VRM registers.
dump\dump_info\RTOSDump
driver_info
cdev_drv_info	The statistics of character device driver.
dmesg_info	System startup information (execution result of dmesg).
edma_drv_info	The statistics of edma driver.
kbox_info	kbox information.
lsmod_info	Information about loaded drivers.
veth_drv_info	The statistics of virtual network card driver.
networkinfo
_data_var_dhcp_dhclient.leases	DHCP lease file.
dhclient.conf	DHCP configuration file.
dhclient.leases	DHCP lease file.
dhclient_ip.conf	DHCP configuration file.
dhclient6.conf	DHCP configuration file.
dhclient6.leases	DHCP lease file.
dhclient6_eth0.leases	DHCP lease file.
dhclient6_eth1.leases	DHCP lease file.
dhclient6_eth2.leases	DHCP lease file.
dhclient6_ip.conf	DHCP configuration file.
ifconfig_info	Network information. You can run the ifconfig command to obtain it.
ipinfo_info	iBMC network configuration information.
netstat_info	netstat -a Displays the current network ports and connection status.
resolv.conf	DNS configuration file.
route_info	route Displays the current routing information.
services	Service port information.
other_info
datafs_log	The data check log.
extern.conf	iBMC log file configuration.
login	Login PAM login rules.
logrotate.status	File recording the logrotate status.
ntp.conf	NTP service configuration.
pam_faillock	PAM error message.
pam_tally2	User lockout policy upon an iBMC login failure.
remotelog.conf	Syslog configuration file.
ssh	SSH service configuration.
sshd	SSH PAM login rules.
sshd_config	SSHD service configuration file.
vsftpd	FTP PAM login rules.
sysinfo
cmdline	Kernel command line parameters.
cpuinfo	Information about the CPU chip of the iBMC kernel.
devices	iBMC device information.
df_info	Information about the usage of the iBMC partitions.
diskstats	Information about the iBMC drive status.
filesystems	iBMC file system information.
free_info	Information about available iBMC memory.
interrupts	iBMC interrupt information.
ipcs_q	iBMC process queue information.
ipcs_q_detail	Detailed information about the iBMC process queue.
ipcs_s	iBMC process semaphore information.
ipcs_s_detail	Detailed information about the iBMC process semaphore.
loadavg	iBMC system workload information.
locks	List of iBMC kernel lock files.
meminfo	iBMC memory usage information.
modules	List of iBMC modules.
mtd	Information about the iBMC configuration partition.
partitions	Information about the iBMC partitions.
ps_info	ps -elf Displays detailed information about iBMC processes.
slabinfo	Information about the iBMC slab information.
stat	CPU usage of the iBMC.
top_info	top -bn 1 Displays the current process running information.
uname_info	uname -a Displays current status of the iBMC processes.
uptime	iBMC system operating time
version	Real-time operating system (RTOS) version of the iBMC.
vmstat	iBMC virtual memory statistical information.
versioninfo
app_revision.txt	iBMC version information.
build_date.txt	Time when the iBMC version was built.
fruinfo.txt	FRU electronic label information.
ibmc_revision.txt	iBMC revision information.
RTOS-Release	RTOS release information.
RTOS-Revision	RTOS version markup.
server_config.txt	Current configuration information of the server.
dump\dump_info\SpLogDump NOTE The logs cannot be collected during the SP running process.
iBMALogDump	iBMA log folder.
config	This log information can be collected only after the SP is running. NOTE The logs can be collected after the configuration is exported on the SP.
upgrade	Firmware upgrade log folder.
component_version.json	Configuration file of the Smart Provisioning component package version.
deviceinfo.json	Server asset information.
diagnose	Hardware diagnostics log. NOTE The logs can be collected after hardware diagnosis is performed on the SP.
dmesg.log dmesg.tar.gz	dmesg logs of the small system.
SPCfglog.tar.gz	SPCfg log. NOTE The logs can be collected after the configuration is exported on the SP.
filepatchup_debug.log	Quick deployment file packaging logs. NOTE The logs can be collected after SP quick deployment is performed.
images.log	Quick deployment clone logs. NOTE The logs can be collected after SP quick deployment is performed.
images_restore.log	Quick deployment rollback logs. NOTE The logs can be collected after SP quick deployment is performed.
maintainlog.csv maintainlog.tar.gz	SP maintenance log. The maintainlog files with timestamps are logs collected earlier.
operatinglog.csv	SP operating log. The operatinglog files with timestamps are logs collected earlier.
ping6.log ping6.tar.gz	Network communication logs.
quickdeploy_debug.log	Quick deployment logs. NOTE The logs can be collected after SP quick deployment is performed.
rollback_version.ini	Version that supports component package rollback.
sp_upgrade_info.log	SP self-upgrade logs. NOTE The logs can be collected after SP self-upgrade is performed.
upgrade.log	SP firmware update logs.
upgrade_result.json	Upgrade result logs.
varmesg.log syslog.tar.gz	Small system information logs.
version.json	SP version information.
version.json.*	Verification file of the SP version configuration file.

6.8.17 Performing One-Click Information Collection (diaginfo)

Function

The diaginfo command is used to collect information in one-click mode, including iBMC configuration information, version information, and logs. For more details, see 5.10 One-Click Information Collection.

Format

ipmcget -d diaginfo

Parameters

None

Usage Guidelines

To view the collected information, use a file transfer tool that supports SFTP, for example WinSCP, to transfer the file (for example dump_info.tar.gz) from the /tmp directory to the local PC.

Example

# Perform one-click information collection.

iBMC:/->ipmcget -d diaginfo
Downloading... 100%
Download diagnose info to /tmp/ successfully.